QIYUANHE·Capacitors
Home / Which series for which market.
Selection notes by market

Which series for which market.

A capacitor is selected by duty, not by country. But grid frequency, voltage spread and ambient temperature decide which rating you should be asking for. These notes are what we check before quoting a part number for each region.

Region notes

Bangladesh — 50 Hz, 220–240 V, coastal humidity

Single-phase 50 Hz at 220–240 V, with supply that sags under load. Room fans, washing machines and small compressors are the volume duty; submersible pumps for irrigation are the other big one. Coastal humidity makes a sealed case worth the small premium over an open one.

Pakistan — 50 Hz with a wide voltage swing

50 Hz at 220–240 V nominal, but the swing above and below is wider than in Europe. For motor-run duty we quote the 400 or 450 VAC rating rather than 250 VAC, so the margin survives the peaks instead of being eaten by them.

Gulf and Middle East — 50 Hz, high ambient

50 Hz, 230/400 V, and enclosure temperatures that sit above 45 °C for months. Air-conditioning compressor duty means CBB65 in an oval metal can, with the voltage rating confirmed against the derating for that ambient rather than copied from a catalogue.

Latin America — 60 Hz, mixed voltages

60 Hz raises reactive current for the same microfarads, and nominal voltage varies by country (127 V in parts of Brazil and Mexico, 220–240 V elsewhere). We confirm µF against the motor nameplate at 60 Hz instead of converting a 50 Hz value.

East Africa — 50 Hz, 230–240 V, corrosion

50 Hz at 230–240 V, coastal salt air, and long service intervals between replacements. Sealed cases and stable terminals matter more than a marginal price difference; the pump series is the usual volume item here.

Series at a glance

CBB60Motor run · Washing machines, water pumps, exhaust fans
250–450 VAC · 4–100 µF
CBB61Fan capacitor · Ceiling fans, range hoods, air circulators
250–500 VAC · 0.5–20 µF
CBB65AC compressor run · Split air conditioners, condensing units, chillers
370–450 VAC · 10–100 µF
CD60Motor start · Compressors, refrigeration units, pumps
250–450 VAC · 50–400 µF
Pump seriesSubmersible duty · Deep-well and booster pumps
450 VAC · 10–50 µF
H.V. capacitorMicrowave · Microwave ovens, high-voltage supplies
2100 VAC · 1 µF
W11162561Washing machine · Whirlpool, Maytag, Kenmore washers
250 VAC/B · 45 µF

How we pick a part number

1. Read the old label: capacitance in µF, rated voltage, case shape, terminal type.

2. Match the duty, not just the value: motor run (CBB60/CBB61/CBB65), motor start (CD60), pump (pump series), microwave (H.V. series).

3. Confirm the voltage rating against the grid and the ambient, not against the old part alone — a 250 VAC part on a 240 V grid has almost no margin.

4. Send the part number or drawing; the confirmation comes back in writing before production.

Not sure which series?

Send a photo of the unit and its label. We answer with the series, the rating and the price within one working day.

Factory facts and certificates · Home