Everything on this page is a verifiable statement about QIYUANHE: what we make, where, at what rating, and which certificate covers it. Numbers are the ones we work to, not marketing figures.
QIYUANHE is a film-capacitor manufacturer based in Guangdong, China. Film slitting, winding, impregnation, assembly and electrical test all run under our own roof, which is why we can quote to a drawing instead of to a catalogue.
Seven series are in production: CBB60, CBB61, CBB65, CD60, a submersible-pump series, a microwave high-voltage series and a Whirlpool W11162561 replacement. Twenty-three part types are in production at any time.
Output runs above 100 000 pieces a month, for appliance OEMs, air-conditioning wholesalers, pump assemblers and repair-channel distributors.
CBB60 covers 4–100 µF at 250, 400 and 450 VAC, 50/60 Hz, ±5 %, metallized polypropylene film, dissipation factor ≤ 0.002 at 1 kHz and 20 °C, climatic category 40/70/21 — operating from −40 °C to +85 °C.
CE certificate JAT25020719078SC-1 to EN 60384-4:2016 under the Low Voltage Directive 2014/35/EU was issued on 20 February 2025 by Dongguan Jun'an Testing & Certification. UL 810:2019 test report JAT25020719079SR-1 comes from the same laboratory.
The UL document is a third-party test report, not a UL listing. RoHS declaration covers 2011/65/EU and (EU) 2015/863: no lead, cadmium, mercury, hexavalent chromium, PBB or PBDE. LVD declarations of conformity are signed per model and travel with the order.
| CE — LVD | 2014/35/EU · EN 60384-4:2016 JAT25020719078SC-1 · 20 Feb 2025 |
|---|---|
| UL 810 | UL 810:2019 (test report) JAT25020719079SR-1 · 20 Feb 2025 |
| RoHS | 2011/65/EU · (EU) 2015/863 — · — |
| LVD DoC | 2014/35/EU, signed per model — · with order |
Values are typical for the series and are confirmed per part number against the drawing you approve before production.
Yes. Send the drawing or the part number, plus the quantity you want to test, and we quote sample cost and timing the same way we quote production. Samples run through the same winding, impregnation and electrical test as the production lot, not a separate hand-built batch.
Send a photo of the old unit and its label. Capacitance in µF, rated voltage, case shape (round, oval, rectangular), terminal type and the appliance model are enough to map it to a CBB60, CBB61, CBB65 or CD60 equivalent. If the label is gone, the motor nameplate and the unit's physical size usually still decide it.
The film-capacitor models listed on certificate JAT25020719078SC-1, in the 6–100 µF range. Send us the part number you intend to buy and we confirm in writing whether it falls under that certificate or needs a separate declaration.
No. It is a third-party test report to UL 810:2019 from Dongguan Jun'an Testing & Certification — evidence that the design passed the standard's tests, not a UL Recognized Component listing. If your line requires UL-recognised parts, tell us and we quote a compliant alternative separately.
Yes. Ratings are stated for 50/60 Hz dual operation, which covers the 220–240 V single-phase grids used in Bangladesh, Pakistan, the Gulf and most of East Africa. Capacitance is a physical value and does not change with frequency; what changes is the reactive current, so we confirm the µF against the motor nameplate rather than substituting on voltage alone.
The climatic category is 40/70/21, which caps the case at +85 °C in operation. Where a unit sits in an enclosure above 50 °C ambient, we confirm the voltage derating per drawing instead of shipping the standard rating — that is a selection question, not a different product.
Each capacitor sits in its own compartment with foam padding inside the carton, then cartons are palletised, wrapped and strapped before dispatch. Packing matches the drawing's terminal type, so fork-terminal and wire-lead versions are not mixed in one box.
Yes. OEM marking is standard: your brand, part number and rating printed to the layout you approve. The certificate reference on the label stays, because it is what customs and your incoming inspection will ask for.
Invoice, packing list, CE certificate copy, the LVD declaration of conformity for the model you bought, the RoHS declaration, and the electrical test report for that lot. Report copies for other models are available on request against the part number.
Price, minimum order and lead time come back within one working day. A photo of the unit you are replacing is enough to start.